Skip to content

How to Perform Toyota/Lexus AKL with Autel IM508 and APB112 Key Simulator

Bellow is experience sharing from József Pap from Facebook.

"Lexus CT200h AKL. A little help if you are not familiar with Toyota/Lexus AKL with autel im508 and emulator key. The steps:

  • try to read the immo data via obd, if not working take ot the smart box and dump the eep. After that upload to the autel
  • you will need good net connection
  • connect the emulator key to the autel usb port the emulator led will be blue (USB-A--> micro usb cable)
  • make emulator key from the eep dump
  • DO NOT disconnect the emu from the autel
  • add key menu the autel asking if you want using the emulator
  • put the emulator to the start button
  • after that normal toyota key leraning
  • Always follow the instructions on the screen.."

Previous article Autel TS501 Vs TS508: Review and Comparison

Leave a comment

Comments must be approved before appearing

* Required fields

Latest Posts

  • What should I Do if My Autel Scanner Device is Locked?
    September 23, 2023

    What should I Do if My Autel Scanner Device is Locked?

    The Autel scanner tool has a built-in software system to run, and the Android system uses it just like a mobile phone and needs to be registered to use it. But at the same time, some unexpected situations may occur that cause the device to be locked. How to unlock the Autel scanner device?
    Read now
  • Autel XP400 Pro Key Programming Accessories Review
    September 20, 2023

    Autel XP400 Pro Key Programming Accessories Review

    The Autel XP400 is a powerful chip and key programmer specifically designed for use with the Autel MaxiIM IM608/IM508. Autel Xp400 supports reading/writing vehicle transponder chip data, including Mercedes-Benz infrared keys, generating vehicle-specific keys and dealer keys; reading ECU data, including EEPROM and MCU; and reading/writing vehicle key and remote control data.
    Read now