Autel MaxiCheck MX808S-TS

Autel MaxiCheck MX808S-TS

Autel Scanner MaxiCheck MX808S-TS is the perfect combination of professional diagnostic tool and tailored TPMS tool, which empowers you to deal with TPMS module related issues while carrying out professional on-board diagnoses.

Top 5 Reasons to Get MX808S-TS:

• Activate 99% of all known TPMS sensors
• One Year Free Update Online
• Relearn Parking Brake Pad Position After Replacement; Supports forced diesel particulate filter regeneration and injector adjustments.
• Vehicles Supported: Support Asian and European vehicles after 1996, Auto VIN technology automatically identifies the vehicle's make, model and year 
• Support Multi-Language: English, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian (If you need to change device languge, please send us serial number. We can authorize other language online)

All Systems Diagnoses

MX808S-TS is a full system diagnostic scanner that can quickly test every system module's status and make faster diagnosis & maintenance via reading/clearing codes as well as viewing live data etc., but only costs you a few minutes to finish full scanning. You can learn to perform complex diagnostic functions with that will give you a lot more power over the ins and outs of your car to figure out what is going on with your modern computerized vehicle, so that you can get it fixed and get back on the road in due time.

1. For Engine System:Diagnostic tool MX808S-TS can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
2. For Transmission:It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
3. For ABS System:Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.
4. For SRS System:SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status

Autel MaxiCheck MX808S-TS Special Reset Services

A well-bred horse deserves a good saddle. A real comprehensive OBD diagnostic scanner requires all-in-one functions. MX808S-TS diagnostic tool has been upgraded with over 31 service functions, such as Oil Reset, EPB, BMS, SRS, ABS Bleed, SAS Calibration, DPF Generation, Injector Coding, Throttle Matching, Suspension Matching, TPMS, etc. Moreover, MaxiCheck MX808S-TS can be constantly upgrade with more functions to meet your various maintenance needs.

• Oil Reset - reset the oil life system and turn off the oil light after oil or oil filter replacements.
• EPB - reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
• BMS - reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors. Brake/ABS Bleed: bleed the brake system when the ABS system contains air to restore its braking sensitivity.
• DPF - Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
• IMMO Keys - disable the lost vehicle keys and program the replacement key fob.
• Injector Coding - write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
• SAS Calibration - calibrate the steering angle after replacing steering related parts.
• Suspension Level Calibration - adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
• Throttle Adaption - Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
• Sunroof Initialization - initialize the sunroof data to set the sunroof lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
• Seats Calibration - specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.

Notice: The reset service feature is not available on all models. Pls send VIN and your needs to 👉Contact us👈to check.