Autel MaxiCOM MK900TS, equipped with Full TPMS and Diagnostics, performs well both in your vehicle diagnosis and in Full TPMS. It features Top TPMS Functions, 40+ Hot Service Functions, All System Diagnosis, Bi-directional Control, NO IP Restriction, adn Refresh Hidden Functions, allows you to have both diagnostic and TPMS functions at the same time. So convenient!
Autel MaxiCOM MK900TS is Autel 2024 released model. Upgraded from MK808TS, this MaxiCOM MK900TS has more powerful configurations and more functions.
It is worth mentioning that the Autel MaxiCOM MK900TS is an Advanced TPMS Expert which can diagnose TPMS System and Read/Clear Codes. Compare with MK900BT / MK900 which don't support TPMS functions, this newly released MaxiPRO MK900TS scanner performs to activate 99% TPMS sensors, program Autel MX-Sensors, TPMS Relearn, and TPMS sensor retrofitting.
Activate 99% TPMS Sensors
- The Autel MK900TS is able to trigger almost all known TPMS Sensors, and works in both 433 & 315 MHz Sensor.
Program Autel MX-Sensor
- There are 2 ways to Program Autel MX-Sensor:Copy by OBD and Auto Create
-
Note: Autel MK900TS Can only programming Autel MX-sensors.
TPMS Relearn
- This function can help your newly replaced TPMS Sensors Work Properly, including OBD Relearn, Automatic Relearn, Stationary Relearn.
Advanced TPMS Retrofit
- Here are some steps to perform the TPMS Retrofit Functions:
-
1. Backup Data Back up and save the data of the original vehicle
-
2. Code TPMS Encode TPMS with MaxiPRO MK900TS
-
3. Set up TPMS Set various parameters of TPMS
-
4. Program TPMS Module Program sensor into TPMS Module
-
5. Retrofit TPMS to Vehicle Dashboard Set TPMS parameter to Dashboard panels
MaxiCOM MK900TS with 40+ Hot Service Functions
The Autel MaxiCOM MK900TS OBD2 diagnosis scanner not only has powerful diagnostic functions but also has a vast range of service functions, which will help you easily complete repair work. A money saver for home technicians and money maker for car workshops.
Injector Coding--- Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
Brake Reset--- Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
GEAR Learn--- Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
Key Coding--- Help ECU to recognize the new keys when you need to add new keys, and delete the lost keys;
Oil Reset--- Reset the oil life systems every time the oil and oil filter are changed;
SAS Reset--- Perform steering angle sensor calibration and clear records;
BMS Reset--- Evaluate the battery charge state, register the battery replacement, etc.
ABS Bleeding--- When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
Relearn Throttle--- Initialize the throttle so that the “learned” values stored on ECU are returned to the default state;
DPF REG--- Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
Note: Services and Reset functions are not universal to all the cars, please check compatibility with your VIN before you order.
Full Bi-directional Control Automotive Scanner
Full Capability in Bi-directional Control/ Component Tests
MaxiCOM MK900TS 2024 newest car scanner diagnostic tool features full bi-directional control ability, to send commands to the vehicle's systems/components, to verify system input/output without using the vehicle's controls.
- Fuel Injector Balance, Injector Tests
- Cylinder Deactivation, A/C Compressor Clutch Relay On/Off
- Cycling ABS Pump Motor, EVAP Tests
- Switch on/off car wipers, Rolling up/down car windows/doors/sunroof
- Cooling fan motor command, Interior lighting test, High beam test
OE-Level Diagnosis Same as Original Factory Equipment
Autel MaxiCOM MK900TS car diagnosis expert can read DTCs and data streams for all available systems, and perform active test on the most extensive vehicles.
For instance:
- Engines/ Auto Transmission/ Airbags/ Immobilizer/ABS/ Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/ Doors/ Gateway/ Steering Angle/ Air Suspension/ Body Systems/ Electronic Parking Brake & Motor Assisted/ Power Steering/ Tyre Pressure / Rain Sensors / Stabilizer/ Intelligent Parking Assist/ Door Motors/ Audio Systems/ Air Conditioning/ Tiptronic/ Anti-Theft/ Soft Top/ Headlamp Leveling/ Automatic Clutch/ Headlights/Wash Wipe/ Cruise Control/ Multi Function Steering Wheel/ Aux Heating/ Clutch Electronics, etc.
Autel MaxiCOM MK900TS in Extensive Vehicle Coverage
USA:
GM, Ford, FordEU, Chrysler, Dodge, Jeep
Asia:
Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota, GTR, Scion
Europe:
Benz, Sprinter, BMW, Fiat, LandRover, Maserati, Opel, Peugeot, Porsche, Lancia, LT3, Maybach, Mini, Seat, Skoda, Vauxhall, Renault, Saab, Smart, Volvo, Volkswagen, Abarth, Alfa, Audi, Bentley, Citroen, Dacia, Ford, Jaguar, Lambor Ghini
Autel MaxiCOM MK900TS 10+ High-end Functions
Work with Battery Test BT506
With the extra Autel MaxiBAS BT506 Battery Tests, it can help you test all 6V and 12V 100-2000CCA batteries including the most regular Flooded, AGM, AGM Spiral, EFB and GEL batteries, and can perform in-vehicle & out-of-vehicle tests to determine the health status of the battery, the starter, and the generator respectively.
Work with Autel MV108S Camera
This function can provide you clear image, such as engine cylinders and other small part inspections, easy-to-see.
VAG Guided Functions
Step-by-step operation guidance, easy to master usage for beginners. Compatible with VW/ Audi/ Skoda/ Seat cars etc.
In Stock
|
