Skip to content

Best Autel Scan Tools Autel MD806 Perfect for Professional Use

It is important to check your car regularly. A regular diagnostic tests can detect problems with your vehicle before they require expensive repairs, or worse, leave you stranded on the side of the road after a breakdown. And while many people think diagnostic tests are only necessary when the check engine light comes on, there are many benefits to taking a proactive approach to car maintenance.

On a regular basis, you should bring your car in for a car tune up as well as replace consumable items such as motor oil, radiator coolant, brake fluid, power steering fluid, wiper blades and brake pads. 

Autel MaxiDiag MD806 OBD2 ScannerIf you are looking for an professional scan tools for car maintenance, I would recommend Autel MD806 scanner. It is convenient for home use in your daily life.The MD806 is a professional scan tool with accuracy, efficiency, and reliability, for passenger vehicles, and it has wide vehicle compatibility.

Autel MD806 is a handheld code scanner upgraded from basic OBD2 code readers, and is equipped with many easy-to-use features, such as, built-in DTC Lookup for quick codes definitions acquisition, AutoVIN for automatic VIN detect, great layout and intuitive navigations for easy operations, strong plastic housing with protective rubber boot, 4.0 inches LCD with 800*4 8 0 resolution display, etc. Multilingual supported: English, Traditional Chinese, simplified Chinese, French, German, Spanish, Italian, Swedish, Portuguese, Dutch, Polish, Russian, Japanese, Korean, and Greek.

Autel MaxiDiag MD806 Specification

Processor ARM® Thumb® Processor running at up to 400 MHz
Memory 32MB, 166 MHz
Display 4.0 inch LCD with 800x480 resolution

Mini USB: 2.0

Micro SD Card (16GB)

Power Consumption 1.7 W
Operating Temperature -10°C to 60°C (14°F to 140°F)
Storage Temperature -20°C to 70°C (-4°F to 158°F)
Operating Humidity 5% - 95% non-condensing
Housing Strong plastic housing with protective rubber boot
Dimensions 202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
Weight 313 g (0.69 lb.)

ABS, SRS, Engine & Transmission Diagnosis

Autel MD806 auto scan tool can scan ABS, SRS(airbag), Engine(ECM) and Transmission(TCM/Trans) systems to read and clear fault codes, view live data stream of multiple sensors. This car diagnostic scanner can help mechanics or DIYers to locate misfire cause, malfunctioning injector, check transmission oil temperature and pinpoint why the check engine light, ABS, airbag warning lights are on!

7 Reset Services

Autel MD806 car diagnostic scanner can perform most commonly used service resets including Oil Reset, EPB Reset, SAS Reset, DPF Regeneration, Battery Registration, Throttle Relearn, Air Fuel Ratio Reset. 

All 10 Modes of OBD2 Tests & Diagnostic Report Printing

Autel MD806 OBD2 scan tool can perform all 10 modes of OBD2 tests, including read clear codes, view live data, smog check, view freeze frame data, O2 monitor test, on-board monitor test, component test, module present, view vehicle information. MD806 scanner tool allows printing out diagnostic report for further review and analysis.

Autel MaxiDiag MD806 OBD2 ScannerMD806, as a multifunctional car scanner designed for mechanics and DIYers looking for quick and accurate vehicle diagnosis, provides users with Four Mainstream Systems (Engine/Transmission/ABS/SRS) Diagnoses, 7 Special Reset Services (EPB/SAS/DPF/BMS/Oil Reset), Full OBDII Functions, as well as ideal functions such as Data Print & playback, coming into play for smartly and conveniently dealing with the repair works.

Previous article Autel OBD2 Scanner Provides IMMO Service for Low-end Vehicles

Leave a comment

Comments must be approved before appearing

* Required fields

Latest Posts