Skip to content

Autel Maxicheck Pro: Funtions, Review & Price

Autel MaxiCheck Pro Diagnostic Scanner is designed for car repair services. This is an ideal scanning tool for professional technicians and body shops servicing custom professional systems. The Maxicheck Pro Scanner performs services such as inspection and mileage reset. Reset the oil lamp. Battery maintenance service. Display freeze frame data to display vehicle operating parameters when code is detected. ABS and SRS coverage for over 50 car brands. In addition, MaxiCheck Pro has a variety of diagnostic and special features such as B. ABS vents, airbags and EPBs are universally incompatible.

Today, let's briefly review the functions, features, and price of Autel MaxiCheck Pro.

Autel MaxiCheck Pro

 Autel MaxiCheck Pro

4.5 star

What are the functions of Autel MaxiCheck Pro?

1. OBDII function

For OBD II diagnosis: 1996 and newer vehicle

  • Complete OBDII/EOBD coverage
  • Read, erase codes
  • DTC lookup
  • Live data
  • Freeze frame
  • I/M readiness
  • O2 monitor test
  • On-board monitor test
  • Vehicle information

2. Electronic Parking Brake (EPB) and Anti-Lock Braking System (ABS)

The Autel Maxicheck Pro Diagnostic Tool was developed to safely and professionally replace and recalibrate brake pads as the number of vehicles equipped with electronic handbrakes increases. This tool automatically connects to the control module by connecting to the vehicle's OBD II port. By releasing the braking system, safety is improved with the push of a button. By eliminating the need to use an expensive OE diagnostic system to work with the EPB system, the tool saves time and money! In addition, it is designed to allow technicians to read and clear ABS trouble codes.

Under what circumstances do you need to do ABS bleed?

  • Replace the rear wheel brake cylinder
  • Replace the front wheel brake cylinder
  • Brake oil pot lacks oil

 3. Supplemental Restraint System (SRS) & Airbag

The Check Pro tester allows technicians to read and clear trouble codes and reset airbags and SRS warning lights. Great for body shops.

 4. BMS Service

With BMS (Battery Management System), the scan tool evaluates the state of charge of the battery, monitors the quiescent current, registers changes in the battery, activates the vehicle's hibernation mode, and drives the battery through the diagnostic socket. You can charge it.

5. Steering Angle Sensor (SAS) Calibration

It is designed to perform zero position calibration of the steering angle sensor as the number of vehicles equipped with ESP (Electronic Stability Program) increases.

6. DPF Service

The DPF function allows the diesel particulate filter system to perform various functions without sending the vehicle to the main dealer. This tool gets/clears DPF-related code, resets the DPF light after replacing the filter, finely controls the injection rate, performs static/dynamic regeneration, and is collected when it reaches the maximum level. Burns the particulates.

7. Oil Service Reset

Maxicheck Pro enables the reset of service lights and service intervals on a variety of vehicles including the latest vehicles such as BMW, Mercedes, Volvo, VW / Audi, Fiat, and Mazda. This saves time and money for service workshop services. Light without the use of expensive OEM scanning tools.

How much is MaxiChick Pro?

The price of Autel Maxichick Pro is $199-226 on Amazon

The price of Autel Maxichick Pro is $189.00 on OBDPRICE


Q: Will the autel Maxicheck pro work on bleeding my abs brakes on a 2000 Toyota 4 runner?

A: Japanese cars like Toyota and Honda may have different automatic air vent functions even if they are of the same make, model, and model year. Check with your dealer to see if your vehicle has this feature before you buy. If you can ensure that your car is equipped with automatic vents, Maxicheck Pro can support your needs.

Q: Will this work on a 2008 3500 Duramax?

A: I used this scanner on a 2008 3500 Duramax for the automated bleed and it worked great. I also used it on my 2004 1500 gasser and it worked great as well. Great scanner.

Q: Will this auto bleed abs for the 2006 Chrysler 300 Touring?

A: Yes, It should be able to auto bleed ABS brakes for the 2006 Chrysler 300 Touring.

Customer reviews of Autel Maxicheck Pro

1. Effortless ABS bleeding

I bought this scanning tool because I needed a way to bleed the ABS system on a 2000 GMC truck. Older GM trucks have the annoying habit of rusting the brake lines. In any case, I was hoping that I could bleed my ABS system myself with this scanning tool. After ordering and receiving the device, I took it out of the box and tried it immediately. I couldn't recognize my car or communicate with the truck's computer. I sent an email to Autel and received a quick response. I was instructed to update the software and try again. After updating the software (in 2017), I was able to use the scan tool successfully. In fact, it's a lot easier than a manual, it's almost fully automated, and it took about two minutes to complete. I was impressed. However, I don't understand why the software on the SD card that came with the scan tool wasn't updated from the beginning. I think it will be updated at least until the date of manufacture (September 2019 in this case). The update process takes about an hour. Brake pedals are no longer spongy.

The tool can also adjust steering sensors, manage airbag services and codes, adjust electronic parking brakes, manage batteries, and more. He is also an OBDII reader.

2. GM/Chevy truck ABS activate for a brake bleed

Like a lot of previous reviewers, I purchased this unit for the sole purpose of activating the ABS module for air purge and brake system bleeding. The Autel Maxicheck Pro performed this task with ease. My 2006 Silverado 3500 has the firmest brake pedal I have ever had since I acquired this truck 5 years ago. I have had a constant problem of fluid line rot on this truck caused by road salt and other winter road treatment chemicals. I would recommend anyone replacing brake lines to use copper/nickel alloy lines or vinyl clad with stainless fittings all available on Amazon. There are other ways of activating the ABS. This tool is by far the safest and easiest way to do it. If you bleeding GM brakes with ABS you need this scan tool.

3. Well worth the money, great product.

I came across this product almost by accident while searching YouTube for some how-to videos to help with a brake repair. When we compared the cost of the scanner to the cost of having our car towed to a garage to have the ABS system bled it was well worth what we paid as we saved money. My husband does all of our brake repairs and wished he had known about the Maxipro a long time ago. The shipping was fast and it actually arrived a day early. In no time at all we had the unit hooked up, the ABS system bled and after manually bleeding the rear brakes we were back in business. I truly think the makers of this product need to advertise this product more. My husband has already told at least three people they need to buy this device. Thank you Autel for a great product.

4. Does not perform ABS auto-bleed with 2014 F-350 Diesel

The Maxicheck Pro does not perform the ABS auto-bleed with the 2014 F-350 w/6.7L Powerstroke Diesel.

5. Won't bleed gm 01 abs module

I bought this to bleed abs on a 01 Silverado 4.3l single cab it wont do it tec said gm has that function locked so no autel scanners will do that ... waist of time and money as it says online it will do it ....

Autel Maxicheck Pro Review Video

Previous article Autel OBD2 Scanner Provides IMMO Service for Low-end Vehicles

Leave a comment

Comments must be approved before appearing

* Required fields

Latest Posts